Ship to:/USD

GESP Technology

15+Years Devoted to PCB Solution & Manufacture

Prototype PCB

Prototype PCB

What is the Printed Circuit Board Prototype

A PCB prototype is made to verify the design and construction of the printed circuit board before you start a full production run so you can avoid costly errors. The prototyping stage is the most critical period for engineers, students, and hobbyists. The sooner you get your prototype circuit board back, the sooner you can test it and get started on your standard production run. So it’s important to work with an assembler who can turn your designs around fast.
GESP Technology makes more than 2000 prototypes each year. Below, we will be telling you about the advantages of working with us at the design and prototyping phase.

GESP Prototype PCB Capability

GESP Technology not only makes your boards quick but also makes your job right as well as cost-effective. This greatly reduces your cost and shorten the time for developing your electronic products.GESP Technology supplies the fast prototyping service with 24 hours(2 layers) /48 hours(4 layers). The Gerber files uploading online will be inspected and checked that the files comply with our technical spec. Once the files pass an audit, our sales manager will check the files and reply to you within 24 hours. And our engineer will check again and optimize the files to make production.

GESP Technology offers rapid PCB prototyping services for quick-turn PCB at high quality and low cost. We’re fully compliant with ISO9001:2008 quality management systems, and we have an in-house quality control department to verify that all work meets each regulation depicted by the high standards.

Delivery Time: 2–10 days
Capacity: 10 Dedicated Prototype/QTA factories

Depending on your custom requirements, we can prototype your PCB within 2-7 days, compared to 5-18 days of Standard PCB service.

Use PCB Prototype service when you want:

  • Boards for Design Review or Preproduction Quality Testing: Our PCB prototype service is the perfect way to make sure there are no errors in your design before moving into mass production.
  • Rapid PCB Turnaround: Rapid PCB prototyping means you get your boards fast.
  • Boards with Eight or Fewer Layers: Because we are trying to get your boards back to you as fast as possible, we offer rapid PCB prototyping for boards with no more than eight layers.
  • FR-4 Boards: Your printed circuit board prototype will come on standard FR-4 material.
  • Quality Standard IPC1 Board: Use Standard PCB service if you need:
  • Boards for Full Production: Once you know that your design works, you can contact us for standard PCB service for full production for use in your applications.
  • Slightly Longer Turnaround Time: Since these are the boards you will be using, it takes a little longer to make sure we get everything just right. However, now that you have tested the design, you can go right into your projects once you get your boards.
  • Boards with Up to 9-32 Layers: We have much more flexibility with materials and layers once we have the time to develop your full boards.
  • FR-4, Aluminum, Flex or Other Special Types of Boards
  • Quality Standard IPC2 Boards

Refer to this handy chart for a complete breakdown of the differences between our circuit board prototype and standard circuit board services.

Features Capability
Layer Count 1~12
Material FR-4 (Tg-135C, 145C, 170C), Halogen- free
Rogers Ultralam 2000, Rogers RO4350, Rogers RO4003
Polyimide
Teflon
Black FR-4
Arlon AR-350
CEM-3
Getek Copper Clad Thermal Substrates
Hybrid (Rogers and FR4) BT Epoxy
Nelco 4013
PTFE
Metal Core Materials
Aluminum Core
Board Thickness 0.020″-0.125″
Maximum Board Size 16″ x 22″
12″ x 21″
22″ x 28″
Minimum Core Thickness 0.004″
Copper Thickness 0.5 ~4 oz
Minimum Trace Width / Spacing 0.004″/0.004″
Solder Mask Color Green, Blue, Black, Red, Yellow, White, Clear, and customized
Silkscreen Color White, Black, Yellow, Green, Red, Blue and customized
Minimum Hole Size 0.008″
Finished Hole Size Tolerance +/-0.003″
PCB Surface Finish HASL (vertical & Horizontal), Lead Free HASL, OSP/Entek, ENIG, ENEPIG,
HASL + Gold Finger,Immersion Tin(ISn), Immersion Silver(IAg), Carbon
Ink, Hard Gold(Flash Gold), Soft Gold
Controlled Impedance Tolerance +/-10 %
Aspect Ratio 8/1
Quality Standards IPC Class 2
ISO 9001: 2008
ISO/TS16949: 2009
UL 94v0
Other Tech Blind Vias
Carbon Ink
Peelable Mask
Solder Sample
First Article

3 Reasons To Buy PCB Prototyping From GESP Technology

GESP Technology committed to helping customers achieve sustainable development. We do not own factories, but we “own” what is most important: the relationship between the customer and the factory. As a result, we are not reliant on technologies and investment.
That’s why we believe we can offer PCBs for demanding customers, on time with zero defects, produced sustainably at the lowest total cost.

1. Dedicated Prototype Factories

GESP Technology cooperation with 10 factories dedicated to producing PCB prototypes. It is not optimal to use volume factories for QTA due to the likelihood of interruptions in production, different factory set-ups etcetera, which is why our prototype factories focus on producing prototypes.
Our multi-sourcing concept with automatic benchmarking when quoting minimizes risks since this enables us to always offer you an alternative factory for your prototype. We also have access to the latest technology. All that will also help to reduce your time-to-market.

2. Free Gerber Check And Optimization

Our technicians provide advice to designers and can carry out DFM and DRC to create the most optimal design. We ensure that Gerber files are accurate and match you with the most cost-effective, best quality, and fastest-speed production solutions. A strict quality management system ensures that every board you get from GESP is easy to use. We guarantee the right Gerber file and our rapid response and quick EQ handling procedures will reduce your lead-times.

3. Prototypes Ready For Volum

Because we understand your prototype needs and have all the files needed for mass production, we can achieve the fastest mass-production conversion when you need it. We will provide quick feedback if we find the design unsuitable for volume production. As a customer you will not need to engage with several different suppliers, we take full responsibility for the whole product life cycle, from design to spare parts-and we shorten your time to market.

PCB prototyping is the best practice method used worldwide to verify the quality of a design before proceeding. In the past, some companies may not have had time to develop a prototype PCB, wait for the assembler to put that PCB prototype together and then test it. However, thanks to the rapid PCB prototyping offered by GESP Technology, this is no longer an issue. You can send in your prototyping PCB board design and have a fast PCB prototype in a week or less, giving you plenty of time to test your PCB protoboard to fully prepare for your regular production run.

Get a PCB Prototyping Instant Quote Now

Ready to order prototype PCBs? Use our online quotation software to try the automatic pricing experience.No minimum quantity. You can get your prices instantly after you input a few parameters. Try now!

 

Products & Technology